Shields  There are 11 products.

Showing 1 - 11 of 11 items
  • New
    $9.50

    The L293 Quad Motor Shield can drive up to 4 separate DC motors with an Arduino micro-controller. The speed and direction of the motors can be independently controlled through the PWM connections. The shield can drive motors between 4.5 - 12V with an output current of 1.2A per channel (2A peak current). The L293 Quad Motor Shield can drive up to 4 separate DC...

  • New
    $19.50

    The L298 Dual Motor Shield can drive up to 2 separate DC motors with an Arduino micro-controller. The speed and direction of the motors can be independently controlled through the PWM connections. The shield can drive motors between 6 - 35V with an output current of 2A per channel. The L298 Dual Motor Shield can drive up to 2 separate DC...

  • New
    $28.00

      The IRF3205 Dual Motor Shield is a high current motor driver that can drive up to 2 separate DC motors with an Arduino micro-controller. The speed and direction of the motors can be independently controlled through the PWM connections. The shield can drive motors between 6 - 22V with an output current of 8A per channel (15A peak).   The IRF3205 Dual Motor Shield is a high current motor...

  • New
    $17.50

    The HC-05 is a 2.4GHz Bluetooth 2.0 chip which supports 3MBps modulation. This Bluetooth shield uses the UART interface and has a communication range of 10M. The default baud rate is set to 38400 but you can change the configurations though AT commands. The HC-05 is a 2.4GHz Bluetooth 2.0 chip which supports...

  • New
    $15.50

    The ESP8266 is a low power UART WiFi chip that uses the 802.11 b/g/n standard. This WiFi chip has a built-in TCP/OP protocol stack which can support multiple TCP client connections. You can also use the AT commands to change the configurations. The ESP8266 is a low power UART WiFi chip that uses the...

  • New
    $23.50

    The W5200 is a high speed Ethernet controller with 32KB internal buffer (twice the buffer size of the traditional W5100 model). The shield uses the SPI interface for its operations and can support up to eight simultaneous TCP/UDP connections. The W5200 is a high speed Ethernet controller with 32KB...

  • New
    $15.50

    The Data Logging Shield as an easy way to log real time data from the Arduino-microcontrollers. This unit supports both SD & microSD cards in FAT16 or FAT32 formats. The onboard real time clock is powered separately with a CR1220 battery. The Data Logging Shield as an easy way to log real time...

  • New
    $29.50

    The MP3 Shield is an easy way to play audio files from the Arduino-microcontroller. This shield uses the VS1053 MP3 decoder which can decode Ogg Vorbis/MP3/AAC/WMA/MIDI format audio. You can directly plug in a headphone or speaker into the audio output jack as well as a microphone to the audio input jack. There is also an on-board microSD slot for users... The MP3 Shield is an easy way to play audio files from...

  • New
    $10.50

    The 16x2 LCD Keypad Shield is an easy way to integrate a character display with the Arduino-microcontrollers. The 16x2 LCD is a white on blue LCD which can display a total of 32 characters. The buttons on the shield are all connected though an analog pin where each state is read though a 5 stage voltage divider.  The 16x2 LCD Keypad Shield is an easy way to integrate a...

  • New
    $19.50

    The EL shield is used to drive up to 8 separate EL wires, tapes or panels. Each channel is independently controlled though PWM. This unit can be used in conjunction with a EL inverter which transformers the 5VDC line from the Arduino to the appropriate AC power for the EL wires. The EL shield is used to drive up to 8 separate EL wires,...

  • New
    $12.50

    The 4 Channel Relay Shield is an easy way to switch on and off high voltage applications with the Arduino-microcontroller. Each relay is driven separately and have both the NO (normally opened) and NC (normally closed) terminals. The relays are each rated for 30VDC 10A, 250VAC 7A. The 4 Channel Relay Shield is an easy way to switch on...

Showing 1 - 11 of 11 items